Pre‑Flashed M25P10 ROM Chip for Radeon 7000 PCI (Mac‑Compatible)
 
Description:
Turn your Radeon 7000 PCI into a Mac‑ready graphics card — just by swapping the ROM!
No ROM programmer, no complicated flashing process.
Simply replace the original ROM chip with this pre‑flashed one, and your Radeon 7000 PCI card will be ready to work in your Macintosh.
*Our flashing survice is a pre-flashed ROM chip only, and does not include the Radeon 7000 PCI graphics card. You will need to provide your own.
 
Tested & Proven Cards (They are all Windows version)*See the 2nd Picture:
Kuroutoshikou Radeon 7000 64MB PCI
Sapphire Radeon 7000 32MB PCI
ATI Retail Radeon 7000 32MB PCI (No DVI)
We have not confirmed this, but the XVR-100(X3770A 32MB and X3769A 64MB) released by SUN is the same card as the Radeon 7000 PCI. However, they likely have a 128KB ROM chip soldered in. If you have this card, check the chip.
If you have a Radeon 7000 PCI with a 128KB chip (M25P10), you can program the firmware with FreeDOS (yourself) and there is no need to replace the ROM chip, but if you have difficulty flashing the ROM chip yourself, replacing it with our flashed chip may be one solution.

*The flashed ROM will be Mac ROM v.226. This is the final ROM and the most recommended ROM version.
 
Confirmed Macintosh Compatibility:
Power Mac G3 MT/DT
Power Mac G3 Blue & White
Power Mac 9600 / 8600 / 9500 / 8500 / 7600 / 7300
 
Supported Mac OS Versions:
Mac OS 9.0.4 – 9.2.2, 3D graphics acceleration requires OpenGL 1.2.2 (9.2.1 bundled). 
Mac OS X 10.1 – 10.4 (Tiger) *To use Quartz Extreme, you need a tool called "PCI Extreme".

Here is the link for the Radeon drivers for Mac OS
 
Radeon 7000 Mac ROM Flashing Service Specifications:
Chip: M25P10 (1Mbit SPI Flash) 128KB
Includes: One ROM chip pre‑flashed with Mac‑compatible firmware
Required Work: Desolder the old ROM and solder this one in (soldering skills needed)
Here for a guide on how to retrofit your Mac with Radeon 7000 PCI
 
Perfect for:
Users who want a plug‑and‑play Mac‑ready Radeon 7000
Those who don’t own a ROM programmer or flashing tools
Anyone wanting to revive an old PCI Radeon card for a Power Mac

 Here for a guide on how to retrofit your Mac with Radeon 7000 PCI
 
Notes:
– Soldering is required to replace the chip.
– Modification is at your own risk.
– The red low profile card also has an LC version which has a different VGA chip and so the flashed ROM cannot be used. *VGA chip said"215R6LAEA12"
– Some cards may not support Sleep mode.